A part cut from one picture ends in a straight edge? Paint in the hidden area
You cut a slot symbol into parts, animate it, and the part that was half hidden ends in a flat line the moment it moves. In Riggy, which turns one character or symbol picture into a Spine 4.2 rig with animations through a chat, you can paint that hidden area in right in your project. Here is a carrot in a crate, before and after.
Why the edge appears
A picture only shows what is in front. The crate covers the bottom of the carrot, so nobody drew that bottom. When the picture is cut into parts, some of the hidden area gets filled in, but how much varies: here it was only a strip under the crate's top edge, and below the strip the carrot ended in a straight cut. At rest the crate covers it, and the symbol looks just like the picture. Once the carrot jumps out of the crate, the cut shows.
Before and after
How to paint it in
- Select the part on the canvas or in the bone tree.
- Press “Paint hidden area…” in the panel under the bone tree. You can say what belongs there; we wrote “the rest of the carrot, tapering down to a pointed tip”.
- The result comes as a new version, and the chat says what changed. For the carrot: “hidden part painted in (22 % of the part); the visible part stays as it was”.
The pixels you see at rest stay your own: only the area the crate hides is new. The part keeps its bone and its keys, so animations made before keep working and nothing has to be redone. The card under a fresh cut also names parts likely to show such an edge, with a “Paint in the hidden part of …” button.
What to check before you keep it
- Watch it move, not only at rest. The edge of the new area can show as a seam. We made three tries and kept the first: the second had a band of a different tone across the carrot, the third a kink in the outline. The first still shows a light seam where the new area starts.
- Try again replaces the last try. It paints anew from the rig before that try, and the earlier try is not kept, so judge each one before you press it again.
- The part has to stand straight at rest. For a turned or stretched part, Riggy asks you to straighten it first, and a part that bends with bones can't be painted yet.
- The covered part has to sit under its neighbour. Painting in fills what the parts drawn above it hide. When we tried a coin in a purse, the cut drew the purse with its lining and put the coin on top, so there was nothing to fill. A second cut, with the front and back of the purse as separate parts, came back with the whole coin already drawn.
Who can use it
Painting in opens once your top-ups reach the same total as cutting a picture into parts. The price is on the button, and a try that fails costs nothing.
Where this example comes from
We drew the carrot and the crate for this article; it isn't anyone's project. The picture was cut into two parts in Riggy, and the jump was made by requests in the chat; no key was edited by hand. Both clips play the same keys and were recorded with the official Spine 4.2 web runtime. Painting in shipped on Nov 7 together with adding a new part from a description; both are in last week's digest.